Untitled Document
Untitled Document
 
Untitled Document

 

 


Frequently Asked Questions
Quick Jump Menu:



Frequently Asked Questions


1. Are EAS Doors handicap accessible?


All EAS Doors are handicap accessible, due to their design, the floor sill is 3/4 of an inch in height.






2. How long does it take to install an EAS Door?


It takes about 2 ½ days per EAS Door, depending on the size and amount of doors being installed.


Return to Top



3. What is the Design Load Pressure Rating of an EAS Door?


EAS Doors’ Design Load Pressure Rating is positive 125 psf and negative 125 psf,
which is equivalent to 230 mph.


Return to Top



4. What kind of finish is applied to the aluminum EAS Door?


EAS Doors have a baked on KYNAR finish that performs extremely well in areas with high
salt concentration such as coastal areas.


Return to Top


5. Have EAS Doors endured a hurricane outside of a Testing Lab?


Yes, we have approximately 450 EAS Doors installed that performed flawlessly in
Hurricane Isaac in August of 2012.


Return to Top


6. What is LoE³ glass?


LoE³ stands for low emissivity and is basically a microscopic, metallic coating applied to a surface of glass that reflects and re-radiates heat energy into or out of a home depending on climate conditions. EAS Doors uses only LoE³glass because it greatly increases the energy efficiency.


Return to Top


7. What kind of glass does EAS Doors use?


EAS Doors uses a large missile impact, LoE³, laminate glass that is 9/16 of an inch thick. This LoE³ laminate glass is manufactured with a Dupont Sentry Glass Plus interlayer that is a hard yet slightly flexible plastic that is pressed between two pieces of glass. It is similar to a car windshield.


Return to Top



Untitled Document

 


Contact Us

 


EAS News

 


Info Request

 

Untitled Document
All images and content ©
EAS Doors and Windows, Inc.-
Warning: date() [function.date]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'America/New_York' for 'EST/-5.0/no DST' instead in /data/0/0/1/92/1255/user/1898/htdocs/web/includes/footer.php on line 11
2018

- Share Our Site - Quick Contact - Add to your favorites - Downloads Area
Site Designed By:
RGC Productions